Product ID:SPEEDHIDE ES LATEX ENAMELS, 6-G, 6-416
MSDS Date:06/04/1990
FSC:8010
NIIN:00N073309
MSDS Number: CCNMM

PPG INDUSTRIES INC

260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-963-5822

Cage: DO542

PPG INDUSTRIES INC. COATINGS & RESINS GP

9 ALLISON PARK, PA 15101

Telephone: 412-492-5555

Cage: DO542

CLAY (KAOLIN); (ALUMINUM SILICATE)

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 10-15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9495

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15-20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9495

PROPIONIC ACID,2-METHYL-, MONOESTER WITH

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 1-2%

OSHA PEL N/K

ACGIH TLV: N/K

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 50-55%

OSHA PEL N/K

ACGIH TLV: N/K

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 25-30%

OSHA PEL N/K

ACGIH TLV: N/K

SO THE POTNTL HAZ FOR HUMANS IS LIM. THIS PROD CNTNS

RTECS: 9999999ZZ

OF TITANIUM DIOXIDE DUST IN A LONG TERM STUDY

RTECS: 9999999ZZ

THIS PIGMENT INDICATE NO INCREASED RISK OF CANCER

RTECS: 9999999ZZ

DUSTS FROM COATINGS IS VERY LIM. (ING 10)

RTECS: 9999999ZZ

Fraction By Weight: M/K

SINCE OVEREXPOS ARE NOT EXPECTED, THERE IS NO

RTECS: 9999999ZZ

REDNESS, ITCHING, BURNING SENSATION & VISUAL

RTECS: 9999999ZZ

ITCHING, CRACKING, BURNING, REDNESS, AND SWELLING

RTECS: 9999999ZZ

USE OF THIS PRODUCT. CONTACT A POISON

RTECS: 9999999ZZ

MATERIAL SAFETY DATA SHEET INFORMATION AVAILABLE.

RTECS: 9999999ZZ

PERSISTENT SKIN/EYE IRRITATION OR BREATHING

RTECS: 9999999ZZ

THE TYPE OF AIRBORNE CONTAMINANTS AGAINST WHICH

RTECS: 9999999ZZ

THE LOWEST SUGGESTED EXPOS LIMITS, THE LEL IN THE &

RTECS: 9999999ZZ

TO REMOVE DECOMPOSITION PRODUCTS DURING WELDING OR

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST:HARMFUL/FATAL IF INGEST.
EYE:CAUSES EYE IRRIT. SKIN:MAY CAUSE SLIGHT SKIN IRRIT. INHAL:VAPOR
& SPRAY MIST MAY BE HARMFUL IF INHALED. SANDING & GRINDING DUST MAY
BE HARMFUL IF INHALED. VA POR GENERATED AT ELEVATED TEMP IRRIT
EYES, NOSE & THROAT. CHRONIC: AVOID LONG TERM & REPEATED CONTACT.
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:THIS PROD CNTNS A FORM OF CRYSTALLINE
SILICA WHICH IARC ASSOC W/INCREASED RISK OF CANCER IN LAB ANIMALS.
LONG-TERM EXPOS TO CRYSTALLINE SILICOSIS MAY ALSO LEAD TO A
DISABLING INJURY KNOWN AS SILICA. THESE EFTS ARE ASSOC W/BRTHG
EXCESSIVE AMTS OF SILICA DUST. APPLICATNS OF THIS PROD IS NOT
EXPECTED TO (SUPDAT)
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:INGEST:IF SWALLOWED, DO NOT INDUCE VOMIT. EYE:IN CASE OF
CNTCT, FLUSH IMMED W/PLENTY OF H*2O FOR AT LEAST 15 MIN. SKIN:IN
CASE OF CNTCT, REMOVE PROMPTLY BY WIPING, FOLLOWED BY WATERLESS
HAND CLEANER & SOAP & H*2O. INHAL:IF AFFECTED BY INHAL OF
VAP/SPRAY MIST, REMOVE TO FRESH AIR. APPLY ARTF RESP & OTHER
SUPPORTIVE MEASURES AS REQUIRED. OTHER:IF ANY, OF THE FOLLOWING
OCCUR DURING/FOLLOWING (ING 13)

Extinguishing Media:USE NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
CLASS B EXTINGUISHERS (CARBON DIOXIDE, DRY CHEMICAL OR
UNIVERSAL(SUPDAT)
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFT. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & POSSIBLE (SUPDAT)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO THE BUILD-UP OF STREAM PRESSURE) WHEN EXPOSED TO EXTREME
HEAT.

Spill Release Procedures:PROVIDE MAXIMUM VENT. ONLY PERS EQUIPPED
W/PROPER NIOSH APPROVED RESP & SKIN & EYE PROT SHOULD BE PERMITTED
IN THE AREA REMOVE ALL SOURCES IF IGNITION. TAKE UP SPILLED MATL
W/SAWDUST. VERMICULITE/OTHE R ABSORBENT MATL & PLACE INTO CNTNRS
FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120 DEGREES F.
STORE LRG QTIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF
NFPA CLASS B COMBUST LIQ. PROTECT FROM FREEZING.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
COATING SYSTEM, READ THE MATERIAL SAFETY DATA SHEET(S) FOR THE
OTHER COMPONENT OR COMPONENTS BEFORE BLENDING AS THE RESULTING
MIXTURE MAY HAVE THE HAZA RDS OF ALL OF ITS PARTS.

Respiratory Protection:OVEREXP TO VAP MAY BE PREVENTED BY ENSURING VENT
CONTROLS. VAP EXHST/FRESH AIR ENTRY. NIOSH APPRVD (TC-23C) PAINT
SPRAY/AIR SUPPLIED (TC-19C) RESP MAY ALSO REDUCE EXPOS. READ RESP
MFR'S INSTRUCTION & LITERATURE CAREFULLY TO DETERM (ING 16)
Ventilation:PROVIDE GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO
KEEP THE CONC OF INGRED LISTED IN ING SECTION BELOW (ING 17)
Protective Gloves:NITRILE, NEOPRENE, OR LATEX GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA:AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTINGUISH NFPA
CLASS B COMBUST LIQ FIRES. FIRE FIGHT PROC:AUTOIGNITION/EXPLOSION
WHEN EXPOSED TO EXTREME HEAT. IF H*2O IS USED, FOG NOZZLES ARE PRE
F. HAZ DECOMP PROD:FUMES INCL: CARBON MONOXIDE. EFTS OF
OVEREXP:GENERATE EXCESSIVE AMTS OF RESPIRABLE SILICA, (ING 6)

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:<18
Vapor Density:HVR/AIR
Spec Gravity:1.20-1.32
Evaporation Rate & Reference:<34 (BUOAC=100)
Solubility in Water:<55%
Appearance and Odor:VISC LIQ W/AN ODOR CHARACT OF THE CHEM FAMILY & ANY
SOLV LISTED IN SECTION II.
Percent Volatiles by Volume:<85

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PROD WHEN HEATED.
WELDING, BRAZING/FLAME-CUTTING ON SURF COATED W/THIS PRODUCT MAY
PRDCE (SUPDAT)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WA STE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.